Field-tested technical guides from DeviceLab engineering team: Industrial-grade hardware design (optical isolation, surge protection, onboard flash buffer memory), Circular 10 environmental dataloggers & EMS power monitoring for system integrators; machinery & electrical panel IoT integration for machine builders and MES software providers; along with complete hardware R&D, BOM optimization, EMC compliance, and turnkey OEM mass manufacturing.
Bridge the gap between IoT PoCs (dev kits, breadboards) and commercial hardware prototypes: technical validation gates, power profiling, custom PCB layout, and industrial reliability.
Complete technical design for automated hydropower reservoir and minimum environmental flow monitoring stations under Decree 53/2024/ND-CP using radar level sensors and DL-ENV10 datalogger.
Comprehensive guide on camera surveillance regulations for environmental monitoring stations under Circular 10/2021/TT-BTNMT with RTSP setup.
Diagnose and resolve electromagnetic compliance failures: radiated emissions, conducted noise, ESD strikes, and electrical fast transients (EFT/Surge).
Configuring an RS485 to Ethernet converter via its Web GUI involves four standardized engineering steps: assigning a static IP address aligned with the plant LAN subnet, configuring serial parameters (Baud rate, Data bits, Parity, Stop bits) to match field slaves, selecting the correct operating mode (TCP Server, TCP Client, or Modbus Gateway), and verifying communication […]
Step-by-step engineering guide on connecting electromagnetic flow meters via RS485 Modbus RTU to Datalogger DL-ENV10 compliant with Decree 53/2024/ND-CP and Circular 17/2021/TT-BTNMT.
Comprehensive technical guide on wiring, triggering, and controlling 24-bottle refrigerated automatic water samplers via DL-ENV10 under Circular 10/2021/TT-BTNMT.
Achieve >99.5% SMT assembly yields: solder paste volume controls, nitrogen reflow thermal profiling, BGA void mitigation, and IPC-A-610 Class 2/3 inspection.
A Din rail RS485 to Ethernet converter (DIN-rail Serial Device Server) is an industrial communication unit engineered with a standardized spring-loaded latch to mount directly onto 35mm metal rails (IEC/EN 60715) within electrical distribution and automation control panels, optimizing cabinet footprint, enforcing clean wiring hierarchy, and streamlining field maintenance. This technical guide is part of […]
Comprehensive engineering guide on measuring static and dynamic groundwater levels under Decree 53/2024/ND-CP and Circular 17/2021/TT-BTNMT using submersible hydrostatic pressure sensors and DL-ENV10 datalogger.
Comprehensive technical architecture of Continuous Emission Monitoring Systems (CEMS) under Circular 10/2021/TT-BTNMT and QCVN 19:2009/BTNMT with DL-ENV10 integration.
Comparing commercial vs. industrial RS485 converters reveals four life-or-death hardware differences: 1.5kV to 2.5kV galvanic isolation barriers, multi-stage transient surge suppression (TVS + GDT + PTC), heat-dissipating aluminum Din-rail enclosures rated for -40°C to 75°C, and dedicated dual-watchdog hardware supervisor circuits for autonomous error recovery. This technical guide is part of DeviceLab's comprehensive engineering handbook […]
Whether you are a machine builder needing embedded IoT modules with a branded app, a system integrator requiring tender-compliant gateways/dataloggers, or an industrial software company needing field data acquisition — DeviceLab engineers are ready to evaluate device connectivity and support from PoC to series production.
Confidentiality guaranteed (NDA) • No upfront commitment required
