Skip to content
Tiếng Việt English

Engineering & Technical R&D Capabilities

From system architecture, multi-layer PCB design, and embedded firmware to mechanical enclosure integration and mass production. An experienced engineering team solving complex hardware problems from first principles.

📄 Download Capability Deck (PDF) Submit Project Requirements

Core Engineering Disciplines

Sản xuất và QC bo mạch điện tử

PCBA Fabrication & SMT Assembly

Turnkey PCB manufacturing and precision SMT placement, component procurement via authorized supply chains, AOI, X-ray, and functional testing.

Learn more → Module máy tính nhúng dùng làm nền tảng OEM/ODM

OEM / ODM Platform Customization

Refactoring existing hardware platforms, replacing obsolete microcontrollers, tailoring interfaces, and private labeling.

Learn more → Máy tính biên xử lý AI tại thiết bị

Edge AI & On-Premise Computer Vision

Model quantization, on-device neural network inference on dedicated ARM/Rockchip NPUs, automated optical QC, and privacy preservation.

Learn more → Phần mềm và phần cứng vận hành trên cùng một hệ thống

Cloud Platforms & SCADA Integration

Bridging field hardware to enterprise software: telemetry gateways, MQTT brokers, time-series databases, and custom web dashboards.

Learn more → Prototype embedded

Embedded Software & Firmware Engineering

Bare-metal C/C++, FreeRTOS, Embedded Linux BSP, peripheral drivers, industrial protocols, and dual-bank secure OTA pipelines.

Learn more → Phần cứng PCBA

Hardware & Multi-Layer PCB Engineering

Schematic capture and precision layout from 2 to 8+ layers, controlled impedance, DFM/DFA optimization, and laboratory validation.

Learn more → Hệ thống phần cứng đang được kiểm thử

System Design & IoT Architecture

Holistic systems engineering: physical sensor integration, microcontroller topology, power management budgets, and cloud communications.

Learn more →

Laboratory Instrumentation & Empirical Test Bench

DeviceLab operates comprehensive in-house instrumentation for physical-layer signal verification, protocol decoding, and thermal stress testing prior to manufacturing release.

⚡ Signal Analysis & Measurement

  • Multi-channel Digital Storage Oscilloscopes for high-speed bus probing, power ripple, and clock jitter.
  • 16-channel Logic Analyzers for real-time serial protocol decoding (SPI, I2C, UART, CAN, Modbus).
  • Arbitrary Waveform Generators for synthetic sensor stimulation.
  • Low-noise programmable linear DC power supplies with sub-millivolt voltage transient logging.

🔧 SMT Prototyping & Inspection

  • PID-controlled SMT rework stations preventing thermal shock to sensitive silicon ICs.
  • Multi-zone reflow profiling ovens calibrated specifically for lead-free SAC305 prototype boards.
  • High-resolution optical inspection microscopes for fine-pitch QFN and BGA solder fillet verification.
  • Custom automated pogo-pin test fixtures (FCT Jigs) for automated flashing and GPIO functional tests.

🛡️ Reliability & Pre-Compliance Testing

  • Electrostatic discharge (ESD Gun) simulator testing air discharge (±15kV) and contact discharge (±8kV).
  • Electrical Fast Transient / Surge simulators for RS485 and industrial DC input protection evaluation.
  • Programmable electronic load banks for continuous thermal stress and overcurrent limit profiling.
  • Environmental thermal stress testing chamber for continuous 24/7 burn-in verification (-40°C to +85°C).

Commercial Commitments & Quality Standards

What sets DeviceLab apart is our unwavering technical transparency and commercial product focus from day one.

Turnkey Hardware & Technical Documentation

Clients receive bench-tested working hardware units, pinout diagrams, technical datasheets, communication protocol guides (Modbus/MQTT), and comprehensive warranty support.

Non-Disclosure Agreements (NDA)

Mutual confidentiality agreements executed prior to evaluating proprietary product concepts and commercial specifications.

DFM & BOM Cost Optimization

Selecting components from authorized global distributors with 10-year active lifecycles to prevent supply chain obsolescence.

Pre-Compliance & Certification Support

Guiding partners through field pilots, pre-compliance laboratory tests, and formal CE, FCC, or local regulatory approval.

Frequently Asked Questions About Engineering Capabilities

What laboratory and test instrumentation does DeviceLab maintain?
DeviceLab operates an in-house hardware laboratory equipped with digital storage oscilloscopes, multi-channel logic analyzers, arbitrary waveform generators, programmable linear DC power supplies, PID-controlled SMT rework stations, multi-zone reflow ovens, optical inspection microscopes, and ESD/surge pre-compliance testing gear.
What deliverables and technical documentation are provided upon project completion?
Upon project sign-off, clients receive fully tested working hardware units, comprehensive pinout wiring diagrams, technical datasheets, integration protocol manuals (Modbus/MQTT), and standard manufacturer warranty support.
What is the typical timeline to engineer a new hardware prototype from concept?
System architecture and specification takes 1 to 2 weeks; schematic capture, PCB layout, and prototype assembly takes 3 to 4 weeks; bench bring-up and firmware validation takes 2 to 3 weeks. Typical duration is 6 to 10 weeks for a fully functional, bench-verified hardware prototype.

Need a custom device but unsure where to start?

Describe what your device needs to do. We evaluate technical feasibility, recommend the system architecture, and outline the exact roadmap to begin. No schematics or locked budget required.

Submit Project Requirements Explore Capabilities