Industrial Edge Telemetry Station DeviceLab DL-ENV10 Environmental Monitoring Datalogger & Industrial Gateway (Circular 10)
Industrial telemetry datalogger 100% compliant with Circular 10/2021/TT-BTNMT (wastewater, CEMS) and Decree 53/2024/ND-CP, Circular 17/2021/TT-BTNMT (groundwater, surface water & hydropower monitoring).
HARDWARE ARCHITECTURE & RELIABILITY
Key Technical Features
Engineered for extreme electromagnetic conditions in industrial control panels, substations, and smart facilities.
DeviceLab DL-ENV10 is a modular DIN-rail industrial environmental datalogger purpose-built in 100% compliance with technical guidelines of Circular 10/2021/TT-BTNMT (Article 39). Built on deterministic FreeRTOS, it integrates 4 AI (16-bit), 4 DI, 2 Relays (auto-sampler trigger), 1 isolated RS485, WiFi and BLE. Supports modular 4G LTE Cat.1 / LAN PoE / LoRa comms and up to 3 plug-in I/O modules (AI-8, RTD/TC-4, DI-8, DO-4, COM-2, Energy 3P). Automatically packages structured .txt files pushed every 5 minutes to provincial DONRE servers, with clean MQTT JSON, REST API and Modbus TCP for SCADA.
Circular 10/2021/TT-BTNMT Compliant Data Structuring
Automatically generates UTF-8 text files formatted as [StationID]_[YYYYMMDDHHMMSS].txt, encodes sensor operational status flags (00: normal, 01: calibration, 02: fault), and pushes securely via FTPS/sFTP every 5 minutes to provincial environmental departments across Vietnam.
Modular DIN-Rail Architecture — Infinite Station Configurations
Core unit features 4 AI (16-bit ADC), 4 DI (10kHz pulse counter), 2 Relays (5A), 1 isolated RS485, WiFi and BLE. Expand effortlessly with up to 2 comms slots (4G LTE Cat.1, LoRa AS923, Ethernet LAN/PoE) and 3 hot-detectable I/O modules (AI-8, RTD/TC-4, DI-8, DO-4, COM-2, Energy 3P) without hardware redesign.
Automated Composite Auto-Sampler Trigger & Legal Audit Log
Upon detecting monitored parameters exceeding permitted discharge thresholds (e.g. COD > 75 mg/L, TSS > 50 mg/L), DL-ENV10 immediately pulses isolated relays to trigger sample collection into refrigerated bottles. Retains tamper-proof timestamped audit logs in flash to safeguard contractors during environmental inspections.
Developer & SCADA Multi-Protocol Studio — QR Code Setup
Engineers simply scan the front-panel QR code via smartphone to configure DONRE FTP credentials and select analytical sensors from a pre-loaded library (Hach, Endress+Hauser, WTW, Yokogawa, Siemens, Horiba...). Simultaneously streams clean MQTT JSON, local HTTP REST API, and auto-generated Modbus TCP registers for SCADA.
PLUG-IN EXPANSION I/O MODULES
Expand Effortlessly with up to 3 Hot-Detectable I/O Modules
Start with the core unit and plug in expansion modules as project scope grows. Zero firmware redesign.
8 Kênh Analog Input (4–20mA / 0–10V)
Độ phân giải ADC 16-bit chính xác cao, cách ly quang học chống nhiễu công nghiệp, chọn thang đo bằng phần mềm.
4 Kênh Đo Nhiệt Độ Chính Xác Cao
Hỗ trợ cảm biến nhiệt PT100 (2/3/4 dây) và can nhiệt Thermocouple loại K, J, T chuyên dụng cho khí thải lò hơi và lò sấy.
8 Ngõ Vào Số & Đếm Xung 10 kHz
Giám sát trạng thái cửa trạm, cảnh báo bơm chạy/dừng, đếm xung tốc độ cao cho đồng hồ đo lưu lượng nước thải.
4 Rơ-le Ngõ Ra Điều Khiển 5A
Tiếp điểm relay Form-C 250VAC/5A điều khiển máy lấy mẫu tự động, van xả sự cố, còi đèn báo động vượt ngưỡng xả thải.
2x RS485 Cách Ly + 1x CAN Bus
Mở rộng thêm 2 cổng Modbus RTU riêng biệt kết nối đồng hồ điện đa năng và cụm sensor khí thải mà không nghẽn bus.
Đo Điện Năng 3 Pha Trạm Xử Lý
Đo True RMS điện áp, dòng điện, công suất và điện năng tiêu thụ kWh của hệ thống máy bơm, quạt thổi khí trạm xử lý.
DEVELOPER & SCADA PROTOCOL STUDIO
Clean, Normalized Data Ready for Your Software & SCADA
No vendor lock-in. No mandatory cloud subscriptions. Stream data directly to DONRE servers, private MQTT brokers, or plant SCADA.
// Tệp tin truyền định kỳ 5 phút về Sở TN&MT theo Điều 39 TT 10/2021/TT-BTNMT Station_ID: "KCN_TAMDIEP_NT" DateTime: "2026-10-14 10:30:00" Format: "TT10_ENV" Param Value Unit Status pH 7.42 pH 00 // 00: Tín hiệu tốt COD 48.5 mg/L 00 TSS 28.1 mg/L 00 Amoni 3.82 mg/L 00 NhietDo 29.6 °C 00 LuuLuong 142.8 m3/h 00 // Đẩy bảo mật qua FTPS / sFTP (Port 21 / 22) · Tự động gửi bù khi có mạng lại
// topic: devicelab/DL-ENV10-01/telemetry { "device_id": "DL-ENV10-01", "ts": "2026-10-14T10:30:00+07:00", "net": { "type": "4g_lte", "rssi": -68 }, "points": [ { "id": "ph", "name": "Do_pH", "val": 7.42, "unit": "pH", "status": "00" }, { "id": "cod", "name": "Chi_so_COD","val": 48.5, "unit": "mg/L","status": "00" }, { "id": "tss", "name": "Chat_ran_TSS","val":28.1, "unit": "mg/L","status": "00" }, { "id": "nh4", "name": "Amoni_NH4", "val": 3.82, "unit": "mg/L","status": "00" }, { "id": "flow","name": "Luu_luong", "val": 142.8, "unit": "m3/h","status": "00" } ] }
# CẤU TRÚC FILE .TXT QUAN TRẮC GIẾNG KHOAN NƯỚC NGẦM (NĐ 53/2024/NĐ-CP & TT 17) # Tên file: ND_CONGTYABC_GIENG01_20261015080000.txt # Định dạng: [Thông số] \t [Giá trị] \t [Đơn vị] \t [Thời gian] \t [Trạng thái] LuuLuongTucThoi 45.20 m3/h 20261015080000 00 LuuLuongTichLuy 128450.5 m3 20261015080000 00 MucNuocDong -28.45 m 20261015080000 00 MucNuocTinh -14.20 m 20261015080000 00 // Tự động đồng bộ qua giao thức FTP/SFTP về cổng tiếp nhận Sở TN&MT / Cục Quản lý Tài nguyên nước
# Đọc nhanh toàn bộ điểm dữ liệu hiện tại $ curl -s http://192.168.1.100/api/v1/points | jq . [ { "id": "ai1", "name": "pH", "value": 7.42, "unit": "pH", "quality": "good" }, { "id": "ai2", "name": "COD", "value": 48.5, "unit": "mg/L","quality": "good" }, { "id": "mb1", "name": "LuuLuong", "value": 142.8,"unit": "m3/h","quality": "good" } ]
Modbus TCP Server · Port 502 · Unit ID 1 Input Registers · Float32 Big-Endian (2 Thanh ghi / Điểm) Address Signal Description Unit 30001 ai1 Đo độ pH pH 30003 ai2 Chỉ số COD mg/L 30005 ai3 Chất rắn TSS mg/L 30007 ai4 Chỉ số Amoni NH4+ mg/L 30101 mb_flow Lưu lượng kênh hở m3/h Coils (Điều khiển Output) 00001 do1_sample Kích máy lấy mẫu 1 = Pulse Active 00002 do2_alarm Còi đèn cảnh báo 1 = Bật còi
PRODUCT DATASHEET
Detailed Technical Specifications
All parameters measured and verified under laboratory stress testing and industrial environmental standards.
| Processing Core & OS | Industrial ARM Cortex-M4 32-bit / ESP32-S3 Dual-Core 240 MHz, FreeRTOS deterministic real-time kernel, 2s boot |
|---|---|
| Integrated Analog Inputs (AI) | 4 channels 4–20mA / 0–10V, 16-bit high-resolution ADC, 0.1% accuracy, software selectable, galvanic isolation |
| Integrated Digital Inputs (DI) | 4 isolated DI channels (door contact, pump status, high-speed pulse counting up to 10 kHz for flow meters) |
| Control Relay Outputs (DO) | 2 Form-C relays 250VAC/5A for refrigerated auto-sampler activation and emergency audible/visual alarms |
| Serial Field Communication | 2 × RS485 Modbus RTU Master (2.5kV optical isolation, 600W TVS) + 1 × 1-Wire / I²C digital sensor port |
| Modular I/O Expansion | Up to 3 plug-in modules: AI-8 (8× 4-20mA), RTD/TC-4 (4× PT100/Thermocouple), DI-8, DO-4, COM-2 (2× RS485 + CAN), Energy 3P |
| Network Uplinks & Comms | Industrial 4G LTE Cat.1 (nano-SIM, external SMA antenna) + 10/100M Ethernet RJ45 (PoE option) + WiFi 2.4GHz & BLE5 |
| Data Formats & Protocols | Circular 10, Circular 17 & Decree 53 Tab-delimited .txt via FTPS/sFTP, MQTT/MQTTS JSON, Local HTTP REST API (OpenAPI), Modbus TCP (Port 502) |
| Data Storage & Resilience | 128MB Industrial SPI Flash + MicroSD slot up to 32GB (>180 days of raw logs), automatic chronological backfilling |
| Power Supply & Battery UPS | 9–36V DC (reverse & overvoltage protection) + 24VDC/200mA sensor power output + Integrated 18650 Li-ion UPS (6–8h) |
| Mechanical & Environmental | Standard 35mm DIN-rail mount, ~105 × 90 × 58 mm (6 DIN modules), IP20 (IP65 outdoor enclosure option), -20°C to +65°C |
| Warranty & SI Support | 12-Month Official Warranty, full Factory CQ metrology reports & 2D/3D CAD files |
| Regulatory & Legal Compliance | • Article 39 Circular 10/2021/TT-BTNMT (Automated wastewater & CEMS telemetry) • Decree 53/2024/ND-CP & Circular 17/2021/TT-BTNMT (Groundwater, surface water & hydropower telemetry) |
TERMINAL PINOUT & INDUSTRIAL WIRING
22-Pin Industrial Terminal Block Layout & Wiring Topologies
Heavy-duty pluggable screw terminals supporting 0.5–2.5 mm² wire gauge with galvanic isolation.
Giao diện truyền thông mặt trước
Khay Nano-SIM kép hỗ trợ 4G LTE Cat.1 Viettel / Mobifone / Vinaphone, cổng anten SMA cái mạ vàng, cổng Type-C nạp cấu hình offline, nút bấm Reset và mã QR quét mở Web UI di động trong 5 giây.
Hướng dẫn đấu nối 3 kiểu cảm biến
2-Dây (Loop-powered): Cấp 24V từ DL-ENV10 vào Sensor (+), Sensor (-) nối về AI1. 3/4-Dây: Nguồn riêng, tín hiệu dòng vào AI(+) và AG. RS485: Dây xoắn đôi có bọc kim, bật switch trở 120Ω tại thiết bị cuối cùng.
MECHANICAL DRAWING & MOUNTING
DIN-Rail 35mm Standardized Mechanical Specifications (6 DIN Modules)
Standardized industrial form-factor for seamless integration into outdoor IP65 panels and monitoring shelters.
Chuẩn 6 DIN Modules
Rộng 105mm (tiêu chuẩn EN 50022), chiều cao 90mm, sâu 58mm. Thao tác tháo lắp 1 chạm nhờ lẫy đàn hồi màu cam.
Chống Cháy & Ăn Mòn
Nhựa nhiệt dẻo kỹ thuật ABS-PC chống bắt lửa, chịu va đập IK07 và chống lại hơi ẩm khí axit H₂S, NH₃ tại trạm nước thải.
Nhiệt Độ Công Nghiệp
Hoạt động liên tục 24/7/365 ngoài trời. Tản nhiệt thụ động không quạt, triệt tiêu nguy cơ kẹt quạt do bụi bặm hiện trường.
Trọng Lượng & Đóng Gói
Gọn nhẹ, chống rung lắc chấn động. Đóng gói hoàn chỉnh kèm ăng-ten từ tính 4G SMA dây 3m và hướng dẫn sử dụng nhanh.
ENGINEERING DOWNLOADS & ASSETS
Download Technical Dossiers, Dimensions & Modbus Maps
Complete engineering assets for electrical drafting, BOQ tendering, and SCADA programming.
Datasheet Kỹ Thuật (PDF)
Thông số điện & sơ đồ chânSơ Đồ Kích Thước Lắp Đặt
Quy cách gá ray DIN-rail tủ điệnBảng Thanh Ghi Modbus (XLS)
Bảng thanh ghi SCADA/PLCHướng Dẫn Cài Đặt Nhanh
Cấu hình Web UI quét mã QRORDERING INFORMATION & PART NUMBERS
Standard SKU Part Numbers for BOQ & Tender Specifications
Select the exact core unit and expansion module part numbers for your project quotation.
| Mã SKU / Part No. | Tên cấu hình | Mô tả chi tiết cấu hình phần cứng | Giá tham khảo |
|---|---|---|---|
DL-ENV10-BASIC | Bộ Lõi Chuẩn WiFi | 4 AI (16-bit) + 4 DI + 2 DO 5A + 1 RS485 + WiFi/BLE + Pin UPS | 2.490.000đ |
DL-ENV10-4G | Bộ Lõi Di Động 4G LTE | Cấu hình Basic + Modem 4G LTE Cat.1 + Anten SMA ngoài 3 mét | 3.680.000đ |
DL-ENV10-LAN | Bộ Lõi Cổng Mạng LAN | Cấu hình Basic + Cổng Ethernet RJ45 10/100M cáp quang trạm | 2.940.000đ |
DL-ENV10-POE | Bộ Lõi Cấp Nguồn PoE | Cấu hình Basic + Cổng Ethernet PoE nhận nguồn trực tiếp qua cáp | 3.280.000đ |
| MODULE I/O MỞ RỘNG (CẮM KHE X1, X2, X3) | |||
X-AI8 | Module 8 Analog In | 8 kênh 4–20mA / 0–10V, ADC 16-bit cách ly quang học | 1.090.000đ |
X-RTD4 | Module 4 Kênh Nhiệt Độ | 4 ngõ đo PT100 (2/3/4 dây) hoặc Can nhiệt Thermocouple K, J, T | 1.290.000đ |
X-DI8 | Module 8 Ngõ Vào Số | 8 kênh DI cách ly 3.75kV, hỗ trợ đếm xung lưu lượng 10 kHz | 590.000đ |
X-DO4 | Module 4 Rơ-le Điều Khiển | 4 relay Form-C 250VAC/5A điều khiển máy lấy mẫu và bơm phụ | 650.000đ |
X-COM2 | Module 2 Cổng RS485 + CAN | Mở rộng 2 cổng RS485 Modbus cách ly độc lập + 1 cổng CAN Bus | 790.000đ |
X-EN3P | Module Đo Điện Năng 3 Pha | Đo trực tiếp điện áp 3 pha 3x230/400V, dòng điện CT, Class 0.5 | 1.490.000đ |
FIELD IMPLEMENTATION
Typical Industrial Applications
Proven in factory automation, smart energy management, and industrial IoT retrofitting projects.
Continuous automated wastewater monitoring stations (WWTP) for industrial parks, dyeing, plating, and chemical plants.
Continuous Emission Monitoring Systems (CEMS) for boiler, thermal power, cement kiln, and steel mill stack exhaust gases.
Surface water, groundwater monitoring networks and municipal clean water treatment distribution facilities.
TECHNICAL DOCUMENTATION & ARTICLES
Related Application Notes & Guides
TECHNICAL DOCUMENTATION & ARTICLES
FREQUENTLY ASKED QUESTIONS
Technical FAQs on DL-ENV10
Engineered for extreme electromagnetic conditions in industrial control panels, substations, and smart facilities.
Does the DL-ENV10 meet technical acceptance criteria for Vietnamese environmental departments (DONRE)?
Yes. Deployed across more than 30 provinces, the DL-ENV10 strictly complies with Circular 10/2021/TT-BTNMT (Article 39). It generates compliant formatted .txt files every 5 minutes, implements status flags 00/01/02, and automates FTPS data backfilling during transmission outages without losing single measurement intervals.
How does DL-ENV10 handle power outages and network disconnections at the station?
The DL-ENV10 features an internal backup Lithium battery providing 6–8 hours of emergency autonomy with immediate power failure notifications. Redundant Flash and SD card storage preserves over 180 days of raw telemetry, automatically resending all queued files chronologically once connectivity returns.
Can system integrators purchase DL-ENV10 with private white-label OEM branding for tenders?
Yes. DeviceLab provides turnkey white-label OEM options for system integrators, including custom laser-engraved logos, personalized Web GUI interfaces, and customized MQTT topic trees. Complete technical documentation, CAD drawings, and compliance dossiers are supplied for procurement tender submissions and regulatory filings.
Can we transmit data simultaneously to DONRE and our internal plant SCADA or private cloud?
Yes. The DL-ENV10 supports multi-destination routing: securely uploading .txt files to DONRE FTP/SFTP servers every 5 minutes, publishing JSON telemetry to local MQTT brokers, and serving live registers over Modbus TCP (Port 502) to on-site operator touchscreen HMIs without bus collision.
Can the DL-ENV10 be installed for groundwater boreholes under Decree 53/2024/ND-CP?
Yes. The DL-ENV10 interfaces directly with electromagnetic flowmeters and 4-20mA hydrostatic borehole level transmitters, calculating dynamic and static water levels and automatically transmitting regulatory data to DONRE in full compliance with Decree 53/2024/ND-CP and Circular 17/2021/TT-BTNMT standards for groundwater extraction wells.
Which environmental water quality and emission monitoring sensors are supported?
The datalogger connects to all industrial analyzers measuring pH, COD, TSS, Ammonia, heavy metals, flow, and continuous emission monitoring systems (CEMS: SO2, NOx, CO, dust). It provides isolated RS485 Modbus, analog 4-20mA, 0-10V, and isolated digital input channels for comprehensive telemetry.
Does the DL-ENV10 trigger automatic water samplers when pollution thresholds are exceeded?
Yes. The DL-ENV10 features onboard industrial relay contact outputs. Upon detecting monitored water parameters exceeding regulatory environmental limits, or via remote operator commands, it triggers an external automatic refrigerated sampler to preserve physical water samples for official compliance inspection audits.
What warranty and DONRE acceptance support does DeviceLab provide for the DL-ENV10?
The DL-ENV10 is backed by a 12-month manufacturer replacement warranty. DeviceLab’s technical support engineers assist integrators directly with FTPS test file validations, telemetry flag verification, and on-site acceptance testing until official municipal DONRE certification is signed and approved for discharge.
ENGINEERING PROJECT CONSULTATION
Request Quotation: DL-ENV10
Please submit your project specifications below. DeviceLab engineers will review and respond with formal pricing within 30 minutes.