Skip to content
Technical Consultation
Tiếng Việt English
Technical Handbook • Industrial IoT & Machine Retrofit

Industrial IoT, Machine Connectivity & Gateway Engineering

Actionable engineering guides from DeviceLab: non-intrusive legacy machine data collection, power monitoring, and OEE for manufacturing plants; alongside industrial gateway configuration, Modbus/RS485/MQTT protocols, and custom OEM/ODM device development for system integrators.

Industrial Gateway & RS485 Latest IoT Gateway Selection Criteria for M&E Bidding Specifications
• 17 min read

IoT Gateway Selection Criteria for M&E Bidding Specifications

Technical criteria for selecting IoT Gateways in mechanical and electrical (M&E) bidding dossiers encompass 10 mandatory requirements: wide industrial power input of 9-36VDC with reverse polarity protection; fanless operating temperature of -20°C to +75°C; independent lab electromagnetic compatibility (EMC) testing reports under IEC 61000-4-2/4/5; 2,500Vrms galvanic optical isolation; open multi-protocol BMS support (Modbus TCP, BACnet/IP, […]

Read Article
OEM Devices & Embedded Run/Stop & Production Data Acquisition for Injection Molding Machines
• 18 min read

Run/Stop & Production Data Acquisition for Injection Molding Machines

Extracting Run/Stop status and production output from injection molding machines without digital communication ports is accomplished through non-invasive signal acquisition: Utilizing a 2.5kV optically isolated optocoupler circuit to capture mold open limit switch or clamping relay contacts, combined with a split-core current transformer (CT) to verify hydraulic pump load and reading the 24VDC 3-color Andon […]

Read Article
Industrial Gateway & RS485 RS485 Converter Specification Guide for M&E Tenders & Building BMS (2026)
• 9 min read

RS485 Converter Specification Guide for M&E Tenders & Building BMS (2026)

The RS485 converter specification guide for M&E tenders and Building Management Systems (BMS) outlines rigorous hardware criteria and testing certifications: 1.5kV to 2.5kV galvanic isolation, international EMC compliance (IEC 61000-4-2/4/5), industrial temperature endurance (-40°C to 75°C), 35mm Din-rail mounting, and full CO/CQ legal documentation for material submittal approval. In high-rise commercial complexes, hospitals, industrial plants, […]

Read Article
Industrial Gateway & RS485 Buffered RS485 to Ethernet Converter: Store-and-Forward Zero Data Loss
• 9 min read

Buffered RS485 to Ethernet Converter: Store-and-Forward Zero Data Loss

A buffered RS485 to Ethernet converter (Store-and-Forward Gateway) is a specialized industrial communication device integrated with non-volatile Flash memory (SPI NOR/NAND Flash) and a battery-backed real-time clock (RTC), capable of autonomously caching serial telemetry during LAN or Internet outages and automatically backfilling stored historical data to central SCADA servers once connectivity resumes with zero data […]

Read Article
OEM Devices & Embedded Energy Metering & Panel Temperature Monitoring for Air Compressors
• 18 min read

Energy Metering & Panel Temperature Monitoring for Air Compressors

Energy metering and electrical panel temperature monitoring for rotary screw air compressor systems under ISO 50001 Energy Management Standards (EMS) entails: installing a Class 0.5S digital multi-function power meter with split-core current transformers (CT) configured for 3P4W or 3P3W Aron wiring, mounting surface-contact PT100/NTC temperature sensors on main contactor lugs and compressor airend discharge, and […]

Read Article
OEM Devices & Embedded Cycle Time & Production Monitoring for CNC & Mechanical Press Machines
• 17 min read

Cycle Time & Production Monitoring for CNC & Mechanical Press Machines

Collecting cycle time and production output from CNC machine tools and mechanical stamping presses is accomplished by mounting rugged inductive proximity sensors (M12/M18 IP69K) to detect top dead center (TDC) of the mechanical press crankshaft, coupled with a 20G shock-resistant mounting bracket, 1.6kHz RC low-pass hardware filter, and 5kHz optical isolation; for CNC milling and […]

Read Article
Industrial Gateway & RS485 Connect RS485 Temperature & Humidity Sensors to SCADA via Ethernet
• 9 min read

Connect RS485 Temperature & Humidity Sensors to SCADA via Ethernet

Connecting RS485 temperature and humidity sensors to SCADA via Ethernet is an industrial IoT telemetry architecture that multidrops distributed Modbus RTU sensors across a shared 2-wire serial bus, converting telemetry through an Ethernet gateway into standard Modbus TCP Port 502 streams for supervisory software (WinCC, Ignition, Wonderware) across cleanrooms, pharmaceutical warehouses, and pumping stations. Compared […]

Read Article
Energy & Power Monitoring Connect Digital Power Meters via RS485 to Ethernet for Factory EMS Monitoring
• 9 min read

Connect Digital Power Meters via RS485 to Ethernet for Factory EMS Monitoring

Connecting digital power meters via RS485 to Ethernet for factory energy management systems (EMS) is a standardized telemetry solution that collects voltage, current, active power (kW), power factor (PF), and cumulative energy (kWh) from multi-function meters (Selec, Schneider, Socomec, Vinasino) over a 2-wire Modbus RTU bus, converting telemetry through an Ethernet gateway into real-time SCADA […]

Read Article

Which industrial challenge are you looking to solve?

Whether you need non-intrusive legacy machine data collection for your plant, or custom industrial gateways & OEM devices for your integration projects, DeviceLab engineers are ready to support from PoC to mass deployment.

Submit Project Requirements Explore Capabilities